How To Fix A Leaky Faucet Bathroom
The sharp steel inner jaws of the wrench could easily scratch the metal of your faucet.
How to fix a leaky faucet bathroom. Pull out the stem. Replace the screw cover if required. If your valves are stuck shut off the water main.
Use a wrench to remove the nut. Reattach the packing nut and tighten with a crescent wrench. Repairing a leaky bathroom faucet is a quick inexpensive fix that even the most amateur diyer can tackle.
Repairing that dripping leaking faucet will halt the drain on your wallet. Turn off the water locate the hot and cold water valves beneath the bathroom sink and turn the handle clockwise on both valves to turn off the water to your single handle faucet. Fixing a compression faucet 1.
Once you determine which side is leaking turn off both supply valves. Over time corrosion can virtually weld the handle to the stem. Determine which side of your faucet is leaking by shutting off the water supply valves one at a time.
Run both hot and cold water. Pry off the decorative cap if necessary usually reading hot or cold unscrew and remove. Pry off the handle insert with the thin blade of a pocketknife.
Removing the faucet handle is the toughest part of the job. If the leak doesn t stop after the first valve is turned off it s the other line that s leaking. For more home repai.
For more helpful information check out our how to. Stop that steady drip drip drip before it becomes a stream. Reattach the handle with the set screw.
Insert a philips head screwdriver into the hole and unscrew the handle from the wall. Shut off the water supply to the faucet and open the valves to drain excess water from the system. Wrap the jaws of your wrench in duct tape to protect the metal faucet.
Then turn on the faucet to release the pressure and remove any water that may remain inside the water lines and faucet. Be careful not to overtighten. Over time handles can corrode and weld the faucet on.
To protect the faucet tear off a 2 in 5 1 cm section of duct tape and wrap it around 1 side of the wrench s jaws. You ll be using a wrench to remove parts of the faucet. Turn your water line back on remove any debris or towels from your sink and test out your faucet.
